How to install it

Tools you'll need

• 10mm socket
• Ratchet
• Torque wrench

Step by step

1. 1

   Unbox and inspect

   Confirm all four panels, both rails, and the hardware bag are present.

2. 2

   Position rails

   Set rails on the bed flanges, aligned flush with the front bulkhead.

3. 3

   Clamp rails

   Hand-tighten the rear clamps, then torque to 8 ft-lbs. Do not overtighten.

4. 4

   Set the cover

   Lift the folded cover onto the rails and slide forward until the front seals.

5. 5

   Latch check

   Close the tailgate and confirm both rear latches engage with an audible click.